https://valveseatcutter.com Thu, 16 Apr 2026 05:14:45 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://valveseatcutter.com/2023/04/07/i-failed-first-attempt-at-adjusting-the-auto-cycle-splitter-valve/ https://valveseatcutter.com/2023/04/07/i-failed-first-attempt-at-adjusting-the-auto-cycle-splitter-valve/#comments Fri, 07 Apr 2023 18:39:35 +0000 https://valveseatcutter.com/2023/04/07/i-failed-first-attempt-at-adjusting-the-auto-cycle-splitter-valve/ ]]> https://valveseatcutter.com/2023/04/07/i-failed-first-attempt-at-adjusting-the-auto-cycle-splitter-valve/feed/ 0 https://valveseatcutter.com/2020/05/05/valve-seat-cutter-kit-racing-kart-clone-atv-cycle-predator-3-angle-valve-jobs-2/ https://valveseatcutter.com/2020/05/05/valve-seat-cutter-kit-racing-kart-clone-atv-cycle-predator-3-angle-valve-jobs-2/#comments Tue, 05 May 2020 21:17:24 +0000 http://valveseatcutter.com/2020/05/05/valve-seat-cutter-kit-racing-kart-clone-atv-cycle-predator-3-angle-valve-jobs-2/ Continue Reading →]]>












Valve Seat cutter Kit Carbide Tipped 3 Angles Cut Performance Head 30 Degree, 45 Degree, 60 Degree Racing Kart, Clone, Predator, Hemi, Honda, Briggs, BSP most Motorcycles or engines if they have a 4.5, 5, 5.5, 6,7 mm , 1/4 mm valve stem, If you are building or rebuilding your own small engines, either for performance or just a quality rebuild, this gives you control of cutting your own valve seats you can do a standard 45 degree seat or even 3 angle seat with this set… You can move the sealing surface on the seat for best performance… This is ONLY if you have 4.5, 5, 5.5, 6,7 mm , 1/4 valve stems this kit comes with the following. 1st Top Angle & 2nd Base Angel Cutters Valve seat cutters: 22 mm 30,45 degree 23 mm 30,45 degree 24 mm 30,45 degree 25 mm 30,45 degree 26 mm 30,45 degree 27 mm 30,45 degree 28 mm 30,45 degree 29 mm 30,45 degree 30 mm 30,45 degree 32 mm 30,45 degree 34 mm 30,45 degree 3rd Throat Angle Cutters 23 mm 60 degree 25 mm 60 degree 28 mm 60 degree 30 mm 60 degree 32 mm 60 degree Valve Guide Stems : 4.5, 5, 5.5, 6,7 mm , 1/4 Valve Guide Reamers H. S 4.5, 5, 5.5, 6,7 mm , 1/4 2 x T – HANDEL 2 x DRIVE RODS WOODEN CASE FAST & ECONOMICAL VALVE SEAT RESTORATION SYSTEM Please know this is for hobbyist & professionals builders Racers who build their own engines, or small volume high performance engine builders, If you are building your own racing Kart, Trike, or mini bike, or any engine with 4.5,5,5.5, or 7 mm valve guilds, then this will put you well ahead of those who do not have the ability to have a 3 angle or multi angle valve job. Or if you don’t want to wait weeks to have it done from some outside “machine shop”… Even do a few valve jobs for friends and this will pay for itself MANY times over. The seat cutters in this kit have performed very well for hobbyist & professionals even for me many times… This is NOT rocket science, I personally usually get a very good sealing surface with just the cutters. I use the cutters and then lap in the valves. It takes me 10 to 20 min to get the cuts and the seal I want on a small performance engine. I mark the seat with a black sharpee to see where I will cut, I do this on both valve seats.. Then i lap in the valves with lapping compound until i get a nice grey consistent seat… Clean very well and you are done… First to cut 45 degree sealing surface to get the valve where they want it depth wise.. Then go back and do the blend or flow cuts with the 60 degree and the 30… This is a great tool to learn and experiment with what works with your situation without depending on others and their opinions. Note: depending on your valve size it is possible to do a 4 or 5 step or/angle valve job with these cutters. I can honestly say I have never gotten a better valve seat from an outside machine shop than the ones I CUT on my own with this set. If you race a class that does not allow porting then a good valve seat/ valve Job is the best thing you can do for increased performance. NOTE: if you race a “BOX STOCK” class you can bet the winning engines have a good valve job, If you Race a “claimer class” this is a zero cost performance boost, that costs nothing but a few minutes on the bench. This is a MUST have Tool. We can also produce VALVE SEAT CUTTERS as per costumer requirement. Feel Free To Ask Any Question. The item “Valve Seat Cutter kit Racing Kart Clone ATV Cycle Predator 3 angle Valve Jobs” is in sale since Thursday, April 16, 2020. This item is in the category “eBay Motors\Automotive Tools & Supplies\Other Auto Tools & Supplies”. The seller is “tulz_junky” and is located in DELHI, DELHI. This item can be shipped worldwide.

• Brand: DANISH
• Manufacturer Part Number: 26ARTN -3AC
• Warranty: Yes
• Country/Region of Manufacture: India
• Type: VALVE SEAT CUTTER CARBIDE TIPPED

]]> https://valveseatcutter.com/2020/05/05/valve-seat-cutter-kit-racing-kart-clone-atv-cycle-predator-3-angle-valve-jobs-2/feed/ 0 https://valveseatcutter.com/2019/08/21/valve-seat-cutter-racing-kart-not-neway-cycle-clone-predator-3-angle-valve-job/ https://valveseatcutter.com/2019/08/21/valve-seat-cutter-racing-kart-not-neway-cycle-clone-predator-3-angle-valve-job/#comments Wed, 21 Aug 2019 17:41:27 +0000 http://valveseatcutter.com/2019/08/21/valve-seat-cutter-racing-kart-not-neway-cycle-clone-predator-3-angle-valve-job/ Continue Reading →]]>





99% of my stuff ships in less than 24 hours. Racing Kart, Clone, Predator, Hemi, Honda, Briggs, BSP 3hp, 3.5hp, 5hp 5.5hp 6hp, 6.5hp, 7hp, 70cc 90cc 100cc 110cc 125cc 150cc 160cc 175cc 196cc 208cc 212cc most Motorcycles or engines if they have a 5 or 5.5mm valve stem, If you are building or rebuilding your own small engines, either for performance or just a quality rebuild, this gives you control of cutting your own valve seats, you can do a standard 45 degree seat or a 3 angle seat with this set… You can move the sealing surface on the seat for best performance… This is ONLY if you have 5mm or 5.5mm valve stems, this kit comes with the following. Valve seat Reamer/cutters: 22mm×45° 24mm×45° 27mm×45° 31mm×45° 22mm×58° 24mm×58° 27mm×58° 31mm×58° 20mm×30° 23mm×30° 26mm×30° 30mm×30°Grinding Stones: 21mm×45° 24mm×45° 26mm×45° 30mm×45°Guide Pilot: Diameter 5mm, Diameter 5.5mm. Please know this is for hobby builders and Racers who build their own engines, or small volume high performance engine builders, If you are building your own racing Kart, Trike, or mini bike, or any engine with 5mm or 5.5mm valve guilds, then this will put you well ahead of those who do not have the ability to have a 3 angle or multi angle valve job. Or if you don’t want to wait weeks to have it done from some outside “machine shop”… Even do a few valve jobs for friends and this will pay for itself MANY times over, The seat cutters in this kit have performed very well for me… It takes me 10 to 20 min to get the cuts and the seal I want on a small performance 2 valve engine. This is a great tool to learn and experiment with what works with your situation without depending on others and their opinions. I can honestly say I have never gotten a better valve seat from an outside machine shop than the ones I CUT on my own with this set. If you race a class that does not allow porting then a good valve seat/ valve Job is the best thing you can do for increased performance. NOTE: If you race a “BOX STOCK” class you can bet the winning engines have a good valve job, If you Race a “claimer class” this is a zero cost performance boost, that costs nothing but a few minutes on the bench, This is a MUST have Tool. I get these out of Israel from my industrial carbide supplier who knew I was into building my small performance Kart engines and gifted me one. I was pretty impressed so now I’m offering them to others like me. The item “Valve Seat Cutter Racing Kart Not Neway Cycle Clone Predator 3 angle Valve Job” is in sale since Friday, July 19, 2019. This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Cutting Tools”. The seller is “medus_mcxbzmvnb” and is located in Memphis, Tennessee. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam.

• Modified Item: No
• Custom Bundle: No
• Manufacturer Part Number: pq33
• Brand: proquip
• Non-Domestic Product: No

]]> https://valveseatcutter.com/2019/08/21/valve-seat-cutter-racing-kart-not-neway-cycle-clone-predator-3-angle-valve-job/feed/ 0 https://valveseatcutter.com/2018/09/07/valve-seat-cutter-kit-racing-kart-clone-atv-cycle-predator-3-angle-valve-jobs/ https://valveseatcutter.com/2018/09/07/valve-seat-cutter-kit-racing-kart-clone-atv-cycle-predator-3-angle-valve-jobs/#comments Fri, 07 Sep 2018 09:24:38 +0000 http://valveseatcutter.com/2018/09/07/valve-seat-cutter-kit-racing-kart-clone-atv-cycle-predator-3-angle-valve-jobs/ Continue Reading →]]>












Valve Seat cutter Kit Carbide Tipped 3 Angles Cut Performance Head 30 Degree, 45 Degree, 60 Degree Racing Kart, Clone, Predator, Hemi, Honda, Briggs, BSP most Motorcycles or engines if they have a 4.5, 5, 5.5, 6,7 mm , 1/4 mm valve stem, If you are building or rebuilding your own small engines, either for performance or just a quality rebuild, this gives you control of cutting your own valve seats you can do a standard 45 degree seat or even 3 angle seat with this set… You can move the sealing surface on the seat for best performance… This is ONLY if you have 4.5, 5, 5.5, 6,7 mm , 1/4 valve stems this kit comes with the following. 1st Top Angle & 2nd Base Angel Cutters Valve seat cutters: 22 mm 30,45 degree 23 mm 30,45 degree 24 mm 30,45 degree 25 mm 30,45 degree 26 mm 30,45 degree 27 mm 30,45 degree 28 mm 30,45 degree 29 mm 30,45 degree 30 mm 30,45 degree 32 mm 30,45 degree 34 mm 30,45 degree 3rd Throat Angle Cutters 23 mm 60 degree 25 mm 60 degree 28 mm 60 degree 30 mm 60 degree 32 mm 60 degree Valve Guide Stems : 4.5, 5, 5.5, 6,7 mm , 1/4 Valve Guide Reamers H. S 4.5, 5, 5.5, 6,7 mm , 1/4 2 x T – HANDEL 2 x DRIVE RODS WOODEN CASE FAST & ECONOMICAL VALVE SEAT RESTORATION SYSTEM Please know this is for hobbyist & professionals builders Racers who build their own engines, or small volume high performance engine builders, If you are building your own racing Kart, Trike, or mini bike, or any engine with 4.5,5,5.5, or 7 mm valve guilds, then this will put you well ahead of those who do not have the ability to have a 3 angle or multi angle valve job. Or if you don’t want to wait weeks to have it done from some outside “machine shop”… Even do a few valve jobs for friends and this will pay for itself MANY times over. The seat cutters in this kit have performed very well for hobbyist & professionals even for me many times… This is NOT rocket science, I personally usually get a very good sealing surface with just the cutters. I use the cutters and then lap in the valves. It takes me 10 to 20 min to get the cuts and the seal I want on a small performance engine. I mark the seat with a black sharpee to see where I will cut, I do this on both valve seats.. Then i lap in the valves with lapping compound until i get a nice grey consistent seat… Clean very well and you are done… First to cut 45 degree sealing surface to get the valve where they want it depth wise.. Then go back and do the blend or flow cuts with the 60 degree and the 30… This is a great tool to learn and experiment with what works with your situation without depending on others and their opinions. Note: depending on your valve size it is possible to do a 4 or 5 step or/angle valve job with these cutters. I can honestly say I have never gotten a better valve seat from an outside machine shop than the ones I CUT on my own with this set. If you race a class that does not allow porting then a good valve seat/ valve Job is the best thing you can do for increased performance. NOTE: if you race a “BOX STOCK” class you can bet the winning engines have a good valve job, If you Race a “claimer class” this is a zero cost performance boost, that costs nothing but a few minutes on the bench. This is a MUST have Tool. We can also produce VALVE SEAT CUTTERS as per costumer requirement. Feel Free To Ask Any Question. The item “Valve Seat Cutter kit Racing Kart Clone ATV Cycle Predator 3 angle Valve Jobs” is in sale since Monday, March 5, 2018. This item is in the category “eBay Motors\Automotive Tools & Supplies\Other Auto Tools & Supplies”. The seller is “tulz_junky” and is located in DELHI, DELHI. This item can be shipped worldwide.

• Brand: DANISH
• Manufacturer Part Number: 26ARTN -3AC
• Warranty: Yes
• Country/Region of Manufacture: India
• Type: VALVE SEAT CUTTER CARBIDE TIPPED

]]> https://valveseatcutter.com/2018/09/07/valve-seat-cutter-kit-racing-kart-clone-atv-cycle-predator-3-angle-valve-jobs/feed/ 0