https://valveseatcutter.com Sat, 13 Jun 2026 07:33:01 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://valveseatcutter.com/2026/06/10/valve-seat-cutter-kit-go-kart-mower-motorcycle-atv-3-angle-valve-job-18/ https://valveseatcutter.com/2026/06/10/valve-seat-cutter-kit-go-kart-mower-motorcycle-atv-3-angle-valve-job-18/#comments Wed, 10 Jun 2026 19:25:49 +0000 https://valveseatcutter.com/2026/06/10/valve-seat-cutter-kit-go-kart-mower-motorcycle-atv-3-angle-valve-job-18/ Continue Reading →]]>











VALVE SEAT CUTTER KIT. 30 DEG 45 DEG 70 DEG 8 STEM 2 ARBOR 2 RODS. Must For vintage classic and modern cars. Trucks, big block diesel and petrol engines. VALVE SEAT CUTTERS CAN BE USE. FROM BOTH SIDES FACE AND DEGREE. Contents :- (25 pcs cutters). 1 3/16″, 1 1/4″, 1 5/16″, 1 3/8″, 1 7/16″, 1 1/2″, 1 9/16″, 1 5/8″. 1 11/16″, 1 3/4″, 1 13/16″, 1 7/8″, 2″, 2 1/8″. 1 5/16″, 1 7/16″, 1 3/4″, 1 7/8″, 2″, 21/8/”. 1.1/4″, 13/8″, 1.1/2″, 1.5/8″, 1.3/4. (4pcs) Stems metric size. 7 mm, 8 mm, 8.5 mm, 9 mm, 10 mm. (4pcs)Stems inch size. 11/32″, 3/8″, 5/16″, 11/16″. We can also produce cutters as per costumer requirement. CARBIDE TIPPED VALVE SEAT CUTTER SETS. (12PCS, 14PCS, 17PCS, 21PCS, 6PCS). ARE ALSO AVAILABLE WITH US. Feel Free To Ask Any Question. We are here to serve you 24×7. The Items we supply are Quality and at low rates. As we are manufacturing most of the items. Track Page Views With.

]]> https://valveseatcutter.com/2026/06/10/valve-seat-cutter-kit-go-kart-mower-motorcycle-atv-3-angle-valve-job-18/feed/ 0 https://valveseatcutter.com/2026/06/10/chevy-big-block-heads-upgrade-valve-seat-cutter-set-carbide-tipped-3-angle-cut-16/ https://valveseatcutter.com/2026/06/10/chevy-big-block-heads-upgrade-valve-seat-cutter-set-carbide-tipped-3-angle-cut-16/#comments Wed, 10 Jun 2026 07:24:42 +0000 https://valveseatcutter.com/2026/06/10/chevy-big-block-heads-upgrade-valve-seat-cutter-set-carbide-tipped-3-angle-cut-16/ Continue Reading →]]>





Chevy Big Block Heads Upgrade. Valve seat Cutter Set. Carbide Tipped 3 Angle Cut. 30 DEG 45 DEG 60 DEG. Milling in the following sizes. At 45 DEGREE + 90 DEGREE. 30 DEGREE + 90 DEGREE. Contents :- 6x cutters 30,45,60 DEGREE. 2.230 – 30 Degree Top Angle Cutter For Intake. 2.230 – 45 Degree Primary Base Angle Cutter For Intake. 2.125 – 60 Degree Inner (Throating) Angle Cutter For Intake. 1.880 – 30 Degree Top Angle Cutter For Exhaust. 1.880 – 45 Degree Primary Base Angle Cutter For Exhaust. 1.750 – 60 Degree Inner (Throating) Angle Cutter For Exhaust. 2x STEMS 11/32″, 3/8″, 5/16. 2x VALVE GUIDE HONE REAMERS 11/32″, 3/8″, 5/16. FREE TARIFF AND FREE DUTY FOR USA CUSTUMERS / BUYERS. Track Page Views With.

]]> https://valveseatcutter.com/2026/06/10/chevy-big-block-heads-upgrade-valve-seat-cutter-set-carbide-tipped-3-angle-cut-16/feed/ 0 https://valveseatcutter.com/2026/06/09/17x-chevy-sbc-aluminium-heads-valve-seat-cutter-kit-3-angle-cut-carbide-tipped-7/ https://valveseatcutter.com/2026/06/09/17x-chevy-sbc-aluminium-heads-valve-seat-cutter-kit-3-angle-cut-carbide-tipped-7/#comments Tue, 09 Jun 2026 07:21:39 +0000 https://valveseatcutter.com/2026/06/09/17x-chevy-sbc-aluminium-heads-valve-seat-cutter-kit-3-angle-cut-carbide-tipped-7/ Continue Reading →]]>









VALVE SEAT RESTORATION KIT. Small Block Chevy 350 Heads. 3 ANGLE CUT AS OEM VALVE SEAT. 3 x 1.940 30, 45 & 60 Degree for Intake. 1.500 30, 45 & 60 Degree for Exhaust. 5/16″, 3/8″, 11/32 VALVE GUIDE REAMER HSS. PLEASE FEEL FREE TO ASK ANY QUESTIONS.

]]> https://valveseatcutter.com/2026/06/09/17x-chevy-sbc-aluminium-heads-valve-seat-cutter-kit-3-angle-cut-carbide-tipped-7/feed/ 0 https://valveseatcutter.com/2026/06/05/3-angle-cut-honda-xr400r-cylinder-head-valve-seat-cutter-kit-carbide-tipped-best-3/ https://valveseatcutter.com/2026/06/05/3-angle-cut-honda-xr400r-cylinder-head-valve-seat-cutter-kit-carbide-tipped-best-3/#comments Fri, 05 Jun 2026 07:13:41 +0000 https://valveseatcutter.com/2026/06/05/3-angle-cut-honda-xr400r-cylinder-head-valve-seat-cutter-kit-carbide-tipped-best-3/ Continue Reading →]]>







VALVE SEAT RESTORATION KIT. Honda XR400R Cylinder Head. VALVE SEAT CUTTER KIT CARBIDE TIPPED. 3 ANGLE CUT AS OEM VALVE SEAT. CUTTER SIZES AS UNDER. 35MM + 30MM X 32 DEGREE 35MM + 29MM X 45 DEGREE. 32MM + 28MM X 60 DEGREE. HSS GUIDE REAMER 5.5MM. GUIDE PILOT 5.5MM. PLEASE FEEL FREE TO ASK ANY QUESTIONS. FREE TARIFF AND FREE DUTY FOR USA CUSTUMERS / BUYERS.

]]> https://valveseatcutter.com/2026/06/05/3-angle-cut-honda-xr400r-cylinder-head-valve-seat-cutter-kit-carbide-tipped-best-3/feed/ 0 https://valveseatcutter.com/2026/06/04/motorcycles-3-angle-valve-job-seat-cutter-set-carbide-tipped-usa-free-exp-ship-2/ https://valveseatcutter.com/2026/06/04/motorcycles-3-angle-valve-job-seat-cutter-set-carbide-tipped-usa-free-exp-ship-2/#comments Thu, 04 Jun 2026 07:10:41 +0000 https://valveseatcutter.com/2026/06/04/motorcycles-3-angle-valve-job-seat-cutter-set-carbide-tipped-usa-free-exp-ship-2/ Continue Reading →]]>






Valve Job Seat Cutter Set Carbide Tipped For Motorcycles 3 angle. Valve Seat cutter Kit Carbide Tipped. 3 Angles Cut Performance Head 30 Degree, 45 Degree, 60 Degree Racing Kart, Clone, Predator, Hemi, Honda, Briggs, BSP most Motorcycles or engines if they have a 4.5, 5, 5.5, 6,7 mm, 1/4 mm valve stem, If you are building or rebuilding your own small engines, either for performance or just a quality rebuild, this gives you control of cutting your own valve seats you can do a standard 45 degree seat or even 3 angle seat with this set… You can move the sealing surface on the seat for best performance… This is ONLY if you have 4.5, 5, 5.5, 6,7 mm, 1/4 valve stems this kit comes with the following. 1st Top Angle & 2nd Base Angel Cutters Valve seat cutters. 22 mm 30,45 degree. 23 mm 30,45 degree. 24 mm 30,45 degree. 25 mm 30,45 degree. 26 mm 30,45 degree. 27 mm 30,45 degree. 28 mm 30,45 degree. 29 mm 30,45 degree. 30 mm 30,45 degree. 32 mm 30,45 degree. 34 mm 30,45 degree. 3rd Throat Angle Cutters. 23 mm 60 degree. 25 mm 60 degree. 28 mm 60 degree. 30 mm 60 degree. 32 mm 60 degree. Valve Guide Stems : 4.5, 5, 5.5, 6,7 mm, 1/4 Valve Guide Reamers H. S 4.5, 5, 5.5, 6,7 mm, 1/4 2 x T – HANDEL 2 x DRIVE RODS WOODEN CASE FAST & ECONOMICAL VALVE SEAT RESTORATION SYSTEM Please know this is for hobbyist & professionals builders Racers who build their own engines, or small volume high performance engine builders, If you are building your own racing Kart, Trike, or mini bike, or any engine with 4.5,5,5.5, or 7 mm valve guilds, then this will put you well ahead of those who do not have the ability to have a 3 angle or multi angle valve job. Or if you don’t want to wait weeks to have it done from some outside “machine shop”… Even do a few valve jobs for friends and this will pay for itself MANY times over. The seat cutters in this kit have performed very well for hobbyist & professionals even for me many times… This is NOT rocket science, I personally usually get a very good sealing surface with just the cutters. I use the cutters and then lap in the valves. It takes me 10 to 20 min to get the cuts and the seal I want on a small performance engine. I mark the seat with a black sharpee to see where I will cut, I do this on both valve seats.. Then i lap in the valves with lapping compound until i get a nice grey consistent seat… Clean very well and you are done… First to cut 45 degree sealing surface to get the valve where they want it depth wise.. Then go back and do the blend or flow cuts with the 60 degree and the 30… This is a great tool to learn and experiment with what works with your situation without depending on others and their opinions. Note: depending on your valve size it is possible to do a 4 or 5 step or/angle valve job with these cutters. I can honestly say I have never gotten a better valve seat from an outside machine shop than the ones I CUT on my own with this set. If you race a class that does not allow porting then a good valve seat/ valve Job is the best thing you can do for increased performance. Track Page Views With.

]]> https://valveseatcutter.com/2026/06/04/motorcycles-3-angle-valve-job-seat-cutter-set-carbide-tipped-usa-free-exp-ship-2/feed/ 0 https://valveseatcutter.com/2026/06/01/3-angle-cut-valve-seat-cutter-kit-chevy-big-block-motor-30-45-70-degrees-13/ https://valveseatcutter.com/2026/06/01/3-angle-cut-valve-seat-cutter-kit-chevy-big-block-motor-30-45-70-degrees-13/#comments Mon, 01 Jun 2026 07:04:01 +0000 https://valveseatcutter.com/2026/06/01/3-angle-cut-valve-seat-cutter-kit-chevy-big-block-motor-30-45-70-degrees-13/ Continue Reading →]]>




VALVE SEAT CUTTER KIT. MODERN BIKES, ATV’S. Predator Valve Seat Cutter kit Racing Kart. Clone, Predator, Hemi, Honda, Briggs. CUTTER SIZES AS UNDER. 45 DEGREE ANGLE CUTTERS. 32 MM, 30 MM, 29 MM, 28 MM, 27 MM, 26 MM. 25 MM, 24 MM, 23 MM, 22 MM, 21 MM 70 DEGREE ANGLE CUTTERS – 28 MM, 25 MM, 23 MM. VALVE GUIDE HONE REAMER HSS. 4.5 MM, 5 MM, 5.5 MM GUIDE STEMS. 4.0MM, 4.5 MM, 5 MM, 5.5 MM, 6.0mm 2 ARBORS + 2 DRIVE RODS. FEEL FREE TO ASK ANY QUESTION 27x. FEEL FREE TO ASK ANY QUESTION. Track Page Views With.

]]> https://valveseatcutter.com/2026/06/01/3-angle-cut-valve-seat-cutter-kit-chevy-big-block-motor-30-45-70-degrees-13/feed/ 0 https://valveseatcutter.com/2026/05/30/new-valve-job-seat-cutter-set-carbide-tipped-for-motorcycles-3-angle-3/ https://valveseatcutter.com/2026/05/30/new-valve-job-seat-cutter-set-carbide-tipped-for-motorcycles-3-angle-3/#comments Sat, 30 May 2026 19:00:40 +0000 https://valveseatcutter.com/2026/05/30/new-valve-job-seat-cutter-set-carbide-tipped-for-motorcycles-3-angle-3/ Continue Reading →]]>







Valve Job Seat Cutter Set Carbide Tipped For Motorcycles 3 angle. Valve Seat cutter Kit Carbide Tipped. 3 Angles Cut Performance Head 30 Degree, 45 Degree, 60 Degree Racing Kart, Clone, Predator, Hemi, Honda, Briggs, BSP most Motorcycles or engines if they have a 4.5, 5, 5.5, 6,7 mm, 1/4 mm valve stem, If you are building or rebuilding your own small engines, either for performance or just a quality rebuild, this gives you control of cutting your own valve seats you can do a standard 45 degree seat or even 3 angle seat with this set… You can move the sealing surface on the seat for best performance… This is ONLY if you have 4.5, 5, 5.5, 6,7 mm, 1/4 valve stems this kit comes with the following. 1st Top Angle & 2nd Base Angel Cutters Valve seat cutters. 22 mm 30,45 degree. 23 mm 30,45 degree. 24 mm 30,45 degree. 25 mm 30,45 degree. 26 mm 30,45 degree. 27 mm 30,45 degree. 28 mm 30,45 degree. 29 mm 30,45 degree. 30 mm 30,45 degree. 32 mm 30,45 degree. 34 mm 30,45 degree. 3rd Throat Angle Cutters. 23 mm 60 degree. 25 mm 60 degree. 28 mm 60 degree. 30 mm 60 degree. 32 mm 60 degree. Valve Guide Stems : 4.5, 5, 5.5, 6,7 mm, 1/4 Valve Guide Reamers H. S 4.5, 5, 5.5, 6,7 mm, 1/4 2 x T – HANDEL 2 x DRIVE RODS. FREE TARIFF AND FREE DUTY FOR USA CUSTUMERS / BUYERS.

]]> https://valveseatcutter.com/2026/05/30/new-valve-job-seat-cutter-set-carbide-tipped-for-motorcycles-3-angle-3/feed/ 0 https://valveseatcutter.com/2026/05/28/17x-chevy-350-small-block-heads-valve-seat-cutter-kit-3-angle-cut-carbide-tipped-14/ https://valveseatcutter.com/2026/05/28/17x-chevy-350-small-block-heads-valve-seat-cutter-kit-3-angle-cut-carbide-tipped-14/#comments Thu, 28 May 2026 18:56:41 +0000 https://valveseatcutter.com/2026/05/28/17x-chevy-350-small-block-heads-valve-seat-cutter-kit-3-angle-cut-carbide-tipped-14/ Continue Reading →]]>




VALVE SEAT RESTORATION KIT. Small Block Chevy 350 Heads. 3 ANGLE CUT AS OEM VALVE SEAT. 3 x 1.940 30, 45 & 60 Degree for Intake. 1.500 30, 45 & 60 Degree for Exhaust. 5/16″, 3/8″, 11/32 VALVE GUIDE REAMER HSS. 1x THREAD CLEANER TAP. PLEASE FEEL FREE TO ASK ANY QUESTIONS. FREE TARIFF AND FREE DUTY FOR USA CUSTUMERS / BUYERS.

]]> https://valveseatcutter.com/2026/05/28/17x-chevy-350-small-block-heads-valve-seat-cutter-kit-3-angle-cut-carbide-tipped-14/feed/ 0 https://valveseatcutter.com/2026/05/26/17x-dyna-3-angle-cut-chrysler-la-heads-valve-seat-cutter-set-carbide-tipped-4/ https://valveseatcutter.com/2026/05/26/17x-dyna-3-angle-cut-chrysler-la-heads-valve-seat-cutter-set-carbide-tipped-4/#comments Tue, 26 May 2026 18:52:42 +0000 https://valveseatcutter.com/2026/05/26/17x-dyna-3-angle-cut-chrysler-la-heads-valve-seat-cutter-set-carbide-tipped-4/ Continue Reading →]]>









VALVE SEAT RESTORATION KIT. CHRYSLER LA HEAD BIG BLOCK. 3 ANGLE CUT AS OEM VALVE SEAT. 1x 30 degree 2.125″ 1x 30 degree 1.750″. 1x 45 degree 2.125″ 1x 45 degree 1.750″. 1x 60 degree 2″ 1x 60 degree 1.562″. 3x 312″, 343″, 375 VALVE GUIDE REAMER HSS. 3x 312″, 343″, 375. VALVE GUIDE REAMER STEM. 2x T – HANDEL. PLEASE FEEL FREE TO ASK ANY QUESTIONS. FREE TARIFF AND FREE DUTY FOR USA CUSTUMERS / BUYERS.

]]> https://valveseatcutter.com/2026/05/26/17x-dyna-3-angle-cut-chrysler-la-heads-valve-seat-cutter-set-carbide-tipped-4/feed/ 0 https://valveseatcutter.com/2026/05/25/valve-seat-cutter-carbide-tipped-3-angle-cut-custom-made-30-45-60-degree-13/ https://valveseatcutter.com/2026/05/25/valve-seat-cutter-carbide-tipped-3-angle-cut-custom-made-30-45-60-degree-13/#comments Mon, 25 May 2026 18:50:42 +0000 https://valveseatcutter.com/2026/05/25/valve-seat-cutter-carbide-tipped-3-angle-cut-custom-made-30-45-60-degree-13/ Continue Reading →]]>







VALVE SEAT CUTTER KIT CARBIDE TIPPED. 3 ANGLE CUT AS ORIGINAL SEAT. 30 DEG 45 DEG 60 DEG. Milling in the following sizes. At 45 DEGREE + 90 DEGREE. 30 DEGREE + 90 DEGREE. Contents :- 6 pcs cutters 45,30,60 DEGREE. 1.500″ – 30 DEG 1.500″ 45 DEG + 1.3/8 – 60 DEG INTAKE. 1.275″ – 30 DEG 1.275″ 45 DEG + 1.1/4 – 60 DEG EXHAUST. VALVE GUIDE HONE REAMER 11/32. 1 pc ARBORS ROADS. Feel Free To Ask Any Question. FREE TARIFF AND FREE DUTY FOR USA CUSTUMERS / BUYERS. Track Page Views With.

]]> https://valveseatcutter.com/2026/05/25/valve-seat-cutter-carbide-tipped-3-angle-cut-custom-made-30-45-60-degree-13/feed/ 0