https://valveseatcutter.com Wed, 21 Oct 2026 07:40:38 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://valveseatcutter.com/2026/10/20/valve-seat-cutter-kit-chevy-ford-2-1-600-30-45-60-70-19x-4-angle-cut/ https://valveseatcutter.com/2026/10/20/valve-seat-cutter-kit-chevy-ford-2-1-600-30-45-60-70-19x-4-angle-cut/#comments Tue, 20 Oct 2026 19:39:37 +0000 https://valveseatcutter.com/2026/10/20/valve-seat-cutter-kit-chevy-ford-2-1-600-30-45-60-70-19x-4-angle-cut/ Continue Reading →]]>




4 ANGLE CUT CARBIDE TIPPED VALVE SEAT CUTTER SET FAST & ECONOMICAL VALVE SEAT RESTORATION SYSTEM Compatible To :- Chevy, Ford Big Block Engine Heads Kit consist of :- 2. We reply within 24 hours. Transit times may vary particularly during peak periods.

]]> https://valveseatcutter.com/2026/10/20/valve-seat-cutter-kit-chevy-ford-2-1-600-30-45-60-70-19x-4-angle-cut/feed/ 0 https://valveseatcutter.com/2026/10/17/valve-seat-cutter-set-5-piece-made-of-carbide-2-cutting-angles/ https://valveseatcutter.com/2026/10/17/valve-seat-cutter-set-5-piece-made-of-carbide-2-cutting-angles/#comments Sat, 17 Oct 2026 19:33:39 +0000 https://valveseatcutter.com/2026/10/17/valve-seat-cutter-set-5-piece-made-of-carbide-2-cutting-angles/ Continue Reading →]]>








Valve seat cutter set 5 pieces made of carbide 2 cutting angles. The spec sheet of this product was originally written in English. Below is an automatic translation into German. Valve Seat Cutter Set, 5-Piece, Carbide, 2 Angle. This product sheet was originally written in English. Below is an automatic French translation. Valve 5x Work Seat Router Set, Carbide Tip, 2 Cutting Angles for Performance Head. Race Kart, Clone, Predator, Hemi, Honda, Briggs, BSP Motorcycles. Carbide Tip Valve Seat Cutting Kit. 2 angle cut as original seat. Milling in the following sizes. 16mm – 45 Degrees. 18mm – 45 Degrees. 36mm – 45 Degrees. 45 degree blades can be used on both sides as the other side is ground at a 90 degree angle. Valve Seat Cutter Set with 5 Working Angles, Carbide Tip, 2 Cutting Angles for Performance Kart Racing Head, Clone, Predator, Hemi, Honda, Briggs, BSP Motorcycles Valve Seat Cutter in the following sizes: 16mm – 45 Degree. Set of 5 Valve Seat Cutters, Tizón Carbide, 2 Angles. 9 Piece Custom Set Valve Seat Milling Cutter Set with Carbide. Seat And Valve Face Cutter 5 Piece Set. 6x Valve Seat Cutters 3 Angles Carbide Cutting 30-45-60 Degrees. Carbide Valve Seat Cutter 2.1/4 30 Degree for Cutting Seats. Carbide Tipped Valve Seat Cutter SET 9 Pcs CUSTOM set. HM 9 Piece CUSTOM SET Valve Seat Cutter Set.

]]> https://valveseatcutter.com/2026/10/17/valve-seat-cutter-set-5-piece-made-of-carbide-2-cutting-angles/feed/ 0 https://valveseatcutter.com/2026/10/16/valve-seat-milling-cutter-set-3-angle-carbide-0-945-1-125-30-45-70/ https://valveseatcutter.com/2026/10/16/valve-seat-milling-cutter-set-3-angle-carbide-0-945-1-125-30-45-70/#comments Fri, 16 Oct 2026 07:30:38 +0000 https://valveseatcutter.com/2026/10/16/valve-seat-milling-cutter-set-3-angle-carbide-0-945-1-125-30-45-70/ Continue Reading →]]>







Cutter Seat Valve Set 3 ANGLE Carbide 0.945″-1.125″ 30-45-70°. The spec sheet of this product was originally written in English. Below is an automatic translation into German. CUTTING SEAT VALVE SET 3 ANGLE CARBIDE 0.945″-1.125″ 30-45-70°. This product data sheet was originally written in English. Below is an automatic translation into Spanish. CARBIDE TIP 3 ANGLE CUT VALVE SEAT CUTTER SET. 945″-1.125″ 30-45-70 DEGREE. VALVE SEAT RECOVERY KIT. CHRYSLER THE BIG BLOCK HEAD. 3 ANGLE CUT AS VALVE SEAT OEM. 945″ 30 Degree 1.125″. 945″ 45 Degree 1.125″. 70 Degree 0.950″ 70 Degree 1.125″. 5/16 HSS VALVE GUIDE REAMER. VALVE GUIDE REAMER SHANK. PLEASE FEEL FREE TO ASK QUESTIONS. SET OF 3 ANGLE CUT VALVE SEAT CUTTERS WITH CARBIDE TIP. 945″-1.125″ 30-45-70 DEGREE CARBIDE TIP VALVE SEAT RECOVERY KIT FOR CHRYSLER PERFORMANCE ENGINES THE HEAD BLOCK BIG CUT 3 ANGLE AS OEM VALVE SEAT 30 Degree. 945″ 30 Degree 1.125″ 45 Degree 1.125″ 70 Degree 0.950″ 70 Degree 1.125″ Valve Guide No Question 5/16″. Cutter 3 Angle Carbide Seat Valve Set 0.945″ -1.125″ 30-45-70°. Danish Carbide Valve Seat Cutter 2.1/4 30 Degrees. Carbide Tipped Valve Seat Milling Tool Set for Vintage Small Block Chevy. 14x Valve Seat Cutter Kit with HSS and Carbide Reamers. Carbide Valve Seat Scraper Set with Pointed Tip, Valve Grinder. 12-Piece Carbon Steel Valve Seat Cutter Set. Predator Valve Seat Cutter Kit Racing Kart, Clone, Predator, Hemi, Honda.

]]> https://valveseatcutter.com/2026/10/16/valve-seat-milling-cutter-set-3-angle-carbide-0-945-1-125-30-45-70/feed/ 0 https://valveseatcutter.com/2026/10/15/new-valve-job-seat-cutter-set-carbide-tipped-for-motorcycles-3-angle-usa-7/ https://valveseatcutter.com/2026/10/15/new-valve-job-seat-cutter-set-carbide-tipped-for-motorcycles-3-angle-usa-7/#comments Thu, 15 Oct 2026 19:29:38 +0000 https://valveseatcutter.com/2026/10/15/new-valve-job-seat-cutter-set-carbide-tipped-for-motorcycles-3-angle-usa-7/ Continue Reading →]]>








Valve Job Seat Cutter Set Carbide Tipped For Motorcycles 3 angle. Valve Seat cutter Kit Carbide Tipped. 3 Angles Cut Performance Head 30 Degree, 45 Degree, 60 Degree Racing Kart, Clone, Predator, Hemi, Honda, Briggs, BSP most Motorcycles or engines if they have a 4.5, 5, 5.5, 6,7 mm, 1/4 mm valve stem, If you are building or rebuilding your own small engines, either for performance or just a quality rebuild, this gives you control of cutting your own valve seats you can do a standard 45 degree seat or even 3 angle seat with this set… You can move the sealing surface on the seat for best performance… This is ONLY if you have 4.5, 5, 5.5, 6,7 mm, 1/4 valve stems this kit comes with the following. 1st Top Angle & 2nd Base Angel Cutters Valve seat cutters. 22 mm 30,45 degree. 23 mm 30,45 degree. 24 mm 30,45 degree. 25 mm 30,45 degree. 26 mm 30,45 degree. 27 mm 30,45 degree. 28 mm 30,45 degree. 29 mm 30,45 degree. 30 mm 30,45 degree. 32 mm 30,45 degree. 34 mm 30,45 degree. 3rd Throat Angle Cutters. 23 mm 60 degree. 25 mm 60 degree. 28 mm 60 degree. 30 mm 60 degree. 32 mm 60 degree. Valve Guide Stems : 4.5, 5, 5.5, 6,7 mm, 1/4 Valve Guide Reamers H. S 4.5, 5, 5.5, 6,7 mm, 1/4 2 x T – HANDEL 2 x DRIVE RODS WOODEN CASE FAST & ECONOMICAL VALVE SEAT RESTORATION SYSTEM Please know this is for hobbyist & professionals builders Racers who build their own engines, or small volume high performance engine builders, If you are building your own racing Kart, Trike, or mini bike, or any engine with 4.5,5,5.5, or 7 mm valve guilds, then this will put you well ahead of those who do not have the ability to have a 3 angle or multi angle valve job. Or if you don’t want to wait weeks to have it done from some outside “machine shop”… Even do a few valve jobs for friends and this will pay for itself MANY times over. The seat cutters in this kit have performed very well for hobbyist & professionals even for me many times… This is NOT rocket science, I personally usually get a very good sealing surface with just the cutters. I use the cutters and then lap in the valves. It takes me 10 to 20 min to get the cuts and the seal I want on a small performance engine. I mark the seat with a black sharpee to see where I will cut, I do this on both valve seats.. Then i lap in the valves with lapping compound until i get a nice grey consistent seat… Clean very well and you are done… First to cut 45 degree sealing surface to get the valve where they want it depth wise.. Then go back and do the blend or flow cuts with the 60 degree and the 30… This is a great tool to learn and experiment with what works with your situation without depending on others and their opinions. Note: depending on your valve size it is possible to do a 4 or 5 step or/angle valve job with these cutters. I can honestly say I have never gotten a better valve seat from an outside machine shop than the ones I CUT on my own with this set. If you race a class that does not allow porting then a good valve seat/ valve Job is the best thing you can do for increased performance. NOTE: if you race a “BOX STOCK” class you can bet the winning engines have a good valve job, If you Race a “claimer class” this is a zero cost performance boost, that costs nothing but a few minutes on the bench. This is a MUST have Tool. We can also produce VALVE SEAT CUTTERS as per costumer requirement. Feel Free To Ask Any Question. PROUDLY MADE IN INDIA. FREE TARIFF AND FREE DUTY FOR USA CUSTUMERS / BUYERS. Track Page Views With.

]]> https://valveseatcutter.com/2026/10/15/new-valve-job-seat-cutter-set-carbide-tipped-for-motorcycles-3-angle-usa-7/feed/ 0 https://valveseatcutter.com/2026/10/15/24-pcs-valve-seat-cutter-set-carbide-tipped-to-cut-modern-heads-hard-seats-rings-11/ https://valveseatcutter.com/2026/10/15/24-pcs-valve-seat-cutter-set-carbide-tipped-to-cut-modern-heads-hard-seats-rings-11/#comments Thu, 15 Oct 2026 07:28:38 +0000 https://valveseatcutter.com/2026/10/15/24-pcs-valve-seat-cutter-set-carbide-tipped-to-cut-modern-heads-hard-seats-rings-11/ Continue Reading →]]>








CARBIDE TIPPED VALVE SEAT CUTTER HEADS. BIG & SMALL BLOCK V6, V8 DIESEL & PETROL ENGINES HEADS. VINTAGE & MODERN PERFORMANCE HEADS. MILLS IN THE FOLLOWING SIZES. 1.1/4 45 DEGREE. 1.3/8 45 DEGREE. 1.7/16 45 DEGREE. 1.9/16 45 DEGREE. 1.5/8 45 DEGREE. 1.3/4 45 DEGREE. 1.7/8 45 DEGREE. 1.7/8 30 DEGREE. 1.1/4 70 DEGREE. 1.1/2 70 DEGREE. 1.3/4 70 DEGREE. 8 x Guide Stems. 7 mm, 8 mm, 9 mm, 10 mm. 11/32″, 3/8″, 5/16″, 7/16″. 2 x T – HANDLES. 2 x DRIVE BARS. 1 x TAP 1/2 X 20 TPI. We can also produce CUTTERS as per costumer requirement. PLEASE READ THE DESCRIPTION CAREFULLY BEFORE ORDER. Feel Free To Ask Any Question. THANKS FOR LOOKING BY. FREE TARIFF AND FREE DUTY FOR USA CUSTUMERS / BUYERS. Track Page Views With.

]]> https://valveseatcutter.com/2026/10/15/24-pcs-valve-seat-cutter-set-carbide-tipped-to-cut-modern-heads-hard-seats-rings-11/feed/ 0 https://valveseatcutter.com/2026/10/08/valve-seat-cutter-pilot-set-12-piece-precision-valve-guide-pilots-for-valve/ https://valveseatcutter.com/2026/10/08/valve-seat-cutter-pilot-set-12-piece-precision-valve-guide-pilots-for-valve/#comments Thu, 08 Oct 2026 07:14:37 +0000 https://valveseatcutter.com/2026/10/08/valve-seat-cutter-pilot-set-12-piece-precision-valve-guide-pilots-for-valve/ Continue Reading →]]>



This 12-Piece Valve Seat Cutter Pilot Set is designed for accurate valve guide alignment during valve seat cutting and cylinder head repair. The precision pilots help maintain proper cutter positioning for consistent and controlled valve seat machining. Ideal for automotive engine repair shops, cylinder head rebuilding, machine shops and professional mechanics.

]]> https://valveseatcutter.com/2026/10/08/valve-seat-cutter-pilot-set-12-piece-precision-valve-guide-pilots-for-valve/feed/ 0 https://valveseatcutter.com/2026/10/06/24x-valve-seat-cutter-kit-carbide-tipped-ktm-honda-kawasaki-hyosung-tarrif-paid/ https://valveseatcutter.com/2026/10/06/24x-valve-seat-cutter-kit-carbide-tipped-ktm-honda-kawasaki-hyosung-tarrif-paid/#comments Tue, 06 Oct 2026 19:11:41 +0000 https://valveseatcutter.com/2026/10/06/24x-valve-seat-cutter-kit-carbide-tipped-ktm-honda-kawasaki-hyosung-tarrif-paid/ Continue Reading →]]>







24x VALVE SEAT CUTTER KIT CARBIDE TIPPED. 45 DEGREE AND 70 DEGREE. Kit consist of. 45 DEGREE CUTTERS :- 21 MM, 22 MM, 23 MM, 24 MM, 25 MM, 26 MM, 27 MM, 28 MM, 29 MM, 30 MM, 32 MM. 70 DEGREE CUTTERS :- 23 MM, 25 MM, 28 MM. Valve guide stem :- 4.5 MM, 5 MM, 5.5 MM. Valve guide HSS reamers:- 4.5 MM, 5 MM, 5.5 MM. Total 24 pcs complete Kit. CUTTER AND STEM SIZES CAB BE MODIFY AS PER REQUEST. Feel Free To Ask Any Question. Tools & Supplies For Engine Builders.

]]> https://valveseatcutter.com/2026/10/06/24x-valve-seat-cutter-kit-carbide-tipped-ktm-honda-kawasaki-hyosung-tarrif-paid/feed/ 0 https://valveseatcutter.com/2026/10/05/mti-valve-seat-cutter-set-24-pcs-carbide-tipped-chevy-ford-cleavland-best-2/ https://valveseatcutter.com/2026/10/05/mti-valve-seat-cutter-set-24-pcs-carbide-tipped-chevy-ford-cleavland-best-2/#comments Mon, 05 Oct 2026 19:09:44 +0000 https://valveseatcutter.com/2026/10/05/mti-valve-seat-cutter-set-24-pcs-carbide-tipped-chevy-ford-cleavland-best-2/ Continue Reading →]]>









Carbide Tipped Valve Seat Cutters Set 24 Pcs. Big block Diesel and Petrol Engines. Contents :- (12 pcs cutters). 1 7/8 – 30 Degree. 1 1/47 0 Degree. 1 1/27 0 Degree. 1 3/4 7 0 Degree. (4pcs) Stems metric size 7 mm, 8 mm, 8.5 mm, 9 mm. (4pcs)Stems inch size 11/32″, 3/8″, 5/16″, 7/16″. FREE TARIFF AND FREE DUTY FOR USA CUSTUMERS / BUYERS. Track Page Views With.

]]> https://valveseatcutter.com/2026/10/05/mti-valve-seat-cutter-set-24-pcs-carbide-tipped-chevy-ford-cleavland-best-2/feed/ 0 https://valveseatcutter.com/2026/09/30/24-pcs-valve-seat-cutter-set-carbide-tipped-to-cut-modern-heads-hard-seats-rings-10/ https://valveseatcutter.com/2026/09/30/24-pcs-valve-seat-cutter-set-carbide-tipped-to-cut-modern-heads-hard-seats-rings-10/#comments Wed, 30 Sep 2026 06:58:43 +0000 https://valveseatcutter.com/2026/09/30/24-pcs-valve-seat-cutter-set-carbide-tipped-to-cut-modern-heads-hard-seats-rings-10/ Continue Reading →]]>




CARBIDE TIPPED VALVE SEAT CUTTER HEADS. BIG & SMALL BLOCK V6, V8 DIESEL & PETROL ENGINES HEADS. VINTAGE & MODERN PERFORMANCE HEADS. MILLS IN THE FOLLOWING SIZES. 1.1/4 45 DEGREE. 1.3/8 45 DEGREE. 1.7/16 45 DEGREE. 1.9/16 45 DEGREE. 1.5/8 45 DEGREE. 1.3/4 45 DEGREE. 1.7/8 45 DEGREE. 1.7/8 30 DEGREE. 1.1/4 70 DEGREE. 1.1/2 70 DEGREE. 1.3/4 70 DEGREE. 8 x Guide Stems. 7 mm, 8 mm, 9 mm, 10 mm. 11/32″, 3/8″, 5/16″, 7/16″. 2 x T – HANDLES. 2 x DRIVE BARS. 1 x TAP 1/2 X 20 TPI. WOODEN / METAL CASE. We can also produce CUTTERS as per costumer requirement. PLEASE READ THE DESCRIPTION CAREFULLY BEFORE ORDER. Feel Free To Ask Any Question. THANKS FOR LOOKING BY.

]]> https://valveseatcutter.com/2026/09/30/24-pcs-valve-seat-cutter-set-carbide-tipped-to-cut-modern-heads-hard-seats-rings-10/feed/ 0 https://valveseatcutter.com/2026/09/29/6x-valve-seat-cutter-kit1-780-1-48030-45-60-deg-carbidetipped-limraexport-best/ https://valveseatcutter.com/2026/09/29/6x-valve-seat-cutter-kit1-780-1-48030-45-60-deg-carbidetipped-limraexport-best/#comments Tue, 29 Sep 2026 18:57:43 +0000 https://valveseatcutter.com/2026/09/29/6x-valve-seat-cutter-kit1-780-1-48030-45-60-deg-carbidetipped-limraexport-best/









VALVE RE SEATER KIT. 1.780-30-45-60 DEG. 1.480-30-45-60 DEG. VINTAGE & MODERN BIG SMALL BLOCK HEADS. CHEVY, FORD, BUICK, TOYOTA, NISSAN, KIA, HYUNDAI, MITSUBISHI and MORE… FREE TARIFF AND FREE DUTY FOR USA CUSTUMERS / BUYERS.

]]> https://valveseatcutter.com/2026/09/29/6x-valve-seat-cutter-kit1-780-1-48030-45-60-deg-carbidetipped-limraexport-best/feed/ 0